IEEE 1800-2017 6.11.3 says these types are unsigned. Until now these
types were treated as not having a signedness (NOSIGN), and nodes having
these types were later resolved by V3Width to be unsigned. This is a bit
problematic when creating nodes of these types after V3Width. Treating
these types as unsigned from the get go is fine, and actually improves
generated code slightly.
* Add a test to reproduce bug3182. Run the same HDL with -Oo to confirm the result is same.
* Hopefully fix#3182. The result can be 0 only when polarity is true (no AstNot is found during traversal).
* add tests to reproduce #3177.
Any random test circuits can be added to t_split_var_4.v later because it uses CRC to check the result while
t_split_var_0.v has just barrel shifters.
* Fix#3177. Don't merge assign statements if a variable is marked split_var.
- Merge AstNodeIf nodes as well (not just assignment from AstCond)
- Merge merged results recursively (optimizes nested conditionals/ifs)
- Only checking mergeability once per node.
- Don't add redundant masking
- Duplicate cheap statements in both branches, if doing so yields a
larger merge
- Include reduced nodes before the starting conditional in the merge
- Remove redundant casting
- Cheaper final XOR parity flip (~/^1 instead of != 0)
- Support XOR reduction of ~XOR nodes
- Don't add redundant masking of terms
- Support unmasked terms
- Add cheaper implementation for single bit only terms
- Ensure result is clean under all circumstances (this fixes current bugs)
Verilator should now correctly re-evaluate any logic that depends on
state set in a DPI exported function, including if the DPI export is
called outside eval, or if the DPI export is called from a DPI import.
Whenever the design contains a DPI exported function that sets a
non-local variable, we create a global __Vdpi_export_trigger flag, that
is set in the body of the DPI export, and make all variables set in any
DPI exported functions dependent on this flag (this ensures correct
ordering and change detection on state set in DPI exports when needed).
The DPI export trigger flag is cleared at the end of eval, which ensured
calls to DPI exports outside of eval are detected. Additionally the
ordering is modifies to assume that any call to a 'context' DPI import
might call DPI exports by adding an edge to the ordering graph from the
logic vertex containing the call to the DPI import to the DPI export
trigger variable vertex (note the standard does not allow calls to DPI
exports from DPI imports that were not imported with 'context', so we
do not enforce ordering on those).
- Use C++11 initialization syntax
- Use C++11 for loops
- Add const
- Factor out repeated _->fileline() sub-expressions
- Factor out issuing warning message
No functional change.
* EmitXml: Added <ccall>, <constpool>, <initarray>/<inititem>, wrapped children of <if> and <while> with <begin> elements to prevent ambiguity
* EmitXml: added signed="true" to signed basicdtypes
All parameters that are required in the output are now emitted as
'static constexpr, except for string or array of strings parameters,
which are still emitted as 'static const' (required as std::string is
not a literal type, so cannot be constexpr). This simplifies handling
of parameters and supports 'real' parameters.
This patch partitions AstCFuncs under an AstNodeModule based on which
header files they require for their implementation, and emits them
into separate files based on the distinct dependency sets. This helps
with incremental recompilation of the output C++.
A separate V3VariableOrder pass is now used to order module variables
before Emit. All variables are now ordered together, without
consideration for whether they are ports, signals form the design, or
additional internal variables added by Verilator (which used to be
ordered and emitted as separate groups in Emit). For single threaded
models, this is performance neutral. For multi-threaded models, the
MTask affinity based sorting was slightly modified, so variables with no
MTask affinity are emitted last, otherwise the MTask affinity sets are
sorted using the TSP sorter as before, but again, ports, signals, and
internal variables are not differentiated. This yields a 2%+ speedup for
the multithreaded model on OpenTitan.
The -G option now correctly parses simple integer literals as signed
numbers, which is in line with the standard and is significant when
overriding parameters without a type specifier.
Fixes#3060
* Move MTaskState to ThreadSchedule
MTaskState does not concern itself with sandbagging, and thus solely contains information related to the finalized schedule, i.e., completion time, thread ID and next MTask on thread.
* Add .dot graph visualization of ThreadSchedule
Follow-up to #2779.
This commit adds the creation of .dot files - used by GraphViz - to visualize how mtasks are statically scheduled across the set of specified threads.
We visualize each thread as a row, with nodes of a row being the mtasks scheduled for the given thread. The width of the mtask nodes are proportional to their cost. MTask dependencies are shown using an edge between the source and sink mtasks.
Tests used to silently pass when vcddiff aborted. Now fixed. Updated
large array trace reference files for FST, added same reference files
for VCD.
Developers need to update their local vcddiff.
We incorrectly treated two different struct types the same when passed
as an actual parameter to a `parameter type` parameter in an instance,
if the actual parameter expression both hash to the same value and the
structs have the same struct name. This is now corrected.
Fixes#3055.
This commit adds the '--simbenchmark' option to the regression test compile command.
The option is not intended as a fully-fledged benchmarking infrastructure, but rather a
utility for easily generating cycle- and execution time information when executing a verilated test.
As an example use case, the included test file shows how optimization level is varied across
three different builds+simulations, with the statistics for each run output to the same file in
the output directory.
Future work:
- 'sim_time' in the generated top-level main file should be a parameter.
- Given the above, the test execution script from verilog-sim-benchmark can be integrated
to generate better estimates of cycles/second through varying 'sim_time' over multiple executions.
This patch implements #3032. Verilator creates a module representing the
SystemVerilog $root scope (V3LinkLevel::wrapTop). Until now, this was
called the "TOP" module, which also acted as the user instantiated model
class. Syms used to hold a pointer to this root module, but hold
instances of any submodule. This patch renames this root scope module
from "TOP" to "$root", and introduces a separate model class which is
now an interface class. As the root module is no longer the user
interface class, it can now be made an instance of Syms, just like any
other submodule. This allows absolute references into the root module to
avoid an additional pointer indirection resulting in a potential speedup
(about 1.5% on OpenTitan). The model class now also contains all non
design specific generated code (e.g.: eval loops, trace config, etc),
which additionally simplifies Verilator internals.
Please see the updated documentation for the model interface changes.
These are necessary to link the executables. So far we have been saved
by one of the generated headers forward declaring these functions with
extern "C", but changing that header would break these tests.
* Add a test to reproduce #3023. Also applied verilog-mode formatting.
* use unique_ptr. No functional change is intended.
* Introduce restorer that reverts changes during iterate() if failed.
The goal of this patch is to move functionality related to constructing
the thread entry points and then invoking them out of V3EmitC (and into
V3Partition). The long term goal being enabling V3EmitC to emit
functions partitioned based on header dependencies. V3EmitC having to
deal with only AstCFunc instances and no other magic will facilitate
this.
In this patch:
- We construct AstCFuncs for each thread entry point in
V3Partition::finalize and move AstMTaskBody nodes under these functions.
- Add the invocation of the threads as text statements within the
AstExecGraph, so they are still invoked where the exec graph is located.
(the entry point functions are still referenced via AstCCall or
AstAddOrCFunc, so lazy declarations of referenced functions are created
automatically).
- Explicitly handle MTask state variables (VlMTaskVertex in
verilated_threads.h) within Verilator, so no need to text bash a lot of
these any more (some text refs still remain but they are all created
next to each other within V3Partition.cpp).
The effect of all this on the emitted code should be nothing but some
identifier/ordering changes. No functional change intended.
What previously used to be per module static constants created in
V3Table and V3Prelim are now merged globally within the whole model and
emitted as part of a separate constant pool. Members of the constant
pool are global variables which are declared lazily when used (similar to
loose methods).
This patch introduces the concept of 'loose' methods, which semantically
are methods, but are declared as global functions, and are passed an
explicit 'self' pointer. This enables these methods to be declared
outside the class, only when they are needed, therefore removing the
header dependency. The bulk of the emitted model implementation now uses
loose methods.
Using the standard model Makefile, when in addition to an explicit
target, the target 'ccache-report' is also given, a summary of ccache
hits/misses during this invocation of 'make' will be prited at the end
of the build.
A few names were incorrectly mangled, which made --protect-ids produce
invalid output when certain SV class constructs were uses. Now fixed and
added a few extra tests to catch this.
V3Reloop now can roll up indexed assignments between arrays if there is a
constant offset between indices on the left and right hand sides, e.g.:
a[0] = b[2];
a[1] = b[3];
...
a[x] = b[x + 2];
* Tests: Add more case that does not match native C++ width (8, 16, 32 or 64).
* Use AstVarRef::same() instead of AstNode::sameGateTree() because the latter checks dtype in addition to scope.
AstVarRef may have different minWidth in some cases,
but the difference should be ignored in the context of bitOpTree optimization.
This support code merely adds the capability to skip over the encrypted
parts. Many models have unencrypted module interfaces with ports, and
only encrypt the critical parts.
* Tests: Add another testcase that triggers assertion failure in bitOpTree opt.
* Fix assertion failure in bitOpTree opt reported in #2891. Consider the follwoing case.
CCast -> WordSel -> VarRef(leaf)
* Make sure that m_bitPolarity is expanded enough.
The intention was to not merge impure assignments, but the actual
predicate failed if the assignment was indeed pure.
This fix gains 1.5% speed on SweRV EH1.
