Tests: Add t_enum_type_methods, bug473

test_regress/t/t_enum_type_methods.pl

@@ -0,0 +1,18 @@
+#!/usr/bin/perl
+if (!$::Driver) { use FindBin; exec("$FindBin::Bin/bootstrap.pl", @ARGV, $0); die; }
+# DESCRIPTION: Verilator: Verilog Test driver/expect definition
+#
+# Copyright 2003 by Wilson Snyder. This program is free software; you can
+# redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+
+compile (
+    );
+
+execute (
+    check_finished=>1,
+    );
+
+ok(1);
+1;

test_regress/t/t_enum_type_methods.v

@@ -0,0 +1,75 @@
+// DESCRIPTION: Verilator: System Verilog test of enumerated type methods
+//
+// This code instantiates a module that uses a localparam with an enumerated
+// type.
+//
+// This file ONLY is placed into the Public Domain, for any use, without
+// warranty.
+
+// Contributed 2012 by M W Lund, Atmel Corporation and Jeremy Bennett, Embecosm.
+
+
+// **** Pin Identifiers ****
+typedef enum int
+{
+ PINID_A0 = 32'd0,                    // MUST BE ZERO!
+ // - Standard Ports -
+           PINID_A1, PINID_A2, PINID_A3, PINID_A4, PINID_A5, PINID_A6, PINID_A7,
+ PINID_B0, PINID_B1, PINID_B2, PINID_B3, PINID_B4, PINID_B5, PINID_B6, PINID_B7,
+ PINID_C0, PINID_C1, PINID_C2, PINID_C3, PINID_C4, PINID_C5, PINID_C6, PINID_C7,
+ PINID_D0, PINID_D1, PINID_D2, PINID_D3, PINID_D4, PINID_D5, PINID_D6, PINID_D7,
+ PINID_E0, PINID_E1, PINID_E2, PINID_E3, PINID_E4, PINID_E5, PINID_E6, PINID_E7,
+ PINID_F0, PINID_F1, PINID_F2, PINID_F3, PINID_F4, PINID_F5, PINID_F6, PINID_F7,
+ PINID_G0, PINID_G1, PINID_G2, PINID_G3, PINID_G4, PINID_G5, PINID_G6, PINID_G7,
+ PINID_H0, PINID_H1, PINID_H2, PINID_H3, PINID_H4, PINID_H5, PINID_H6, PINID_H7,
+// PINID_I0, PINID_I1, PINID_I2, PINID_I3, PINID_I4, PINID_I5, PINID_I6, PINID_I7,-> DO NOT USE!!!! I == 1
+ PINID_J0, PINID_J1, PINID_J2, PINID_J3, PINID_J4, PINID_J5, PINID_J6, PINID_J7,
+ PINID_K0, PINID_K1, PINID_K2, PINID_K3, PINID_K4, PINID_K5, PINID_K6, PINID_K7,
+ PINID_L0, PINID_L1, PINID_L2, PINID_L3, PINID_L4, PINID_L5, PINID_L6, PINID_L7,
+ PINID_M0, PINID_M1, PINID_M2, PINID_M3, PINID_M4, PINID_M5, PINID_M6, PINID_M7,
+ PINID_N0, PINID_N1, PINID_N2, PINID_N3, PINID_N4, PINID_N5, PINID_N6, PINID_N7,
+// PINID_O0, PINID_O1, PINID_O2, PINID_O3, PINID_O4, PINID_O5, PINID_O6, PINID_O7,-> DO NOT USE!!!! O == 0
+ PINID_P0, PINID_P1, PINID_P2, PINID_P3, PINID_P4, PINID_P5, PINID_P6, PINID_P7,
+ PINID_Q0, PINID_Q1, PINID_Q2, PINID_Q3, PINID_Q4, PINID_Q5, PINID_Q6, PINID_Q7,
+ PINID_R0, PINID_R1, PINID_R2, PINID_R3, PINID_R4, PINID_R5, PINID_R6, PINID_R7,
+ // - AUX Port (Custom) -
+ PINID_X0, PINID_X1, PINID_X2, PINID_X3, PINID_X4, PINID_X5, PINID_X6, PINID_X7,
+ // - PDI Port -
+ PINID_D2W_DAT, PINID_D2W_CLK,
+ // - Power Pins -
+ PINID_VDD0, PINID_VDD1, PINID_VDD2, PINID_VDD3,
+ PINID_GND0, PINID_GND1, PINID_GND2, PINID_GND3,
+ // - Maximum number of pins -
+ PINID_MAX
+ } t_pinid;
+
+
+module t (/*AUTOARG*/
+   // Inputs
+   clk
+   );
+   input clk;
+
+   wire  a = clk;
+   wire  b = 1'b0;
+   reg   c;
+   
+   simple_test_1 simple_test_1_i (/*AUTOINST*/
+				  // Outputs
+				  .c			(c),
+				  // Inputs
+				  .a			(a),
+				  .b			(b));
+
+   // This is a compile time only test. Immediately finish
+   always @(posedge clk) begin
+      $write("*-* All Finished *-*\n");
+      $finish;
+   end
+
+endmodule
+
+// **** Simple use of parameters for sizing an array ****
+module simple_test_1 (input a, b, output c);
+   int myarray1 [PINID_MAX];
+endmodule