Add new tests to support for future commit

test_regress/t/t_case_onehot.pl

@@ -0,0 +1,18 @@
+#!/usr/bin/perl
+if (!$::Driver) { use FindBin; exec("$FindBin::Bin/bootstrap.pl", @ARGV, $0); die; }
+# DESCRIPTION: Verilator: Verilog Test driver/expect definition
+#
+# Copyright 2003 by Wilson Snyder. This program is free software; you can
+# redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+
+compile (
+	 );
+
+execute (
+	 check_finished=>1,
+     );
+
+ok(1);
+1;

test_regress/t/t_case_onehot.v

@@ -0,0 +1,95 @@
+// DESCRIPTION: Verilator: Verilog Test module
+//
+// This file ONLY is placed into the Public Domain, for any use,
+// without warranty, 2009 by Wilson Snyder.
+
+module t (/*AUTOARG*/
+   // Inputs
+   clk
+   );
+   input clk;
+
+   integer 	cyc=0;
+   reg [63:0] 	crc;
+   reg [63:0] 	sum;
+
+   // Take CRC data and apply to testblock inputs
+   wire [2:0]  in = (crc[1:0]==0 ? 3'd0
+		     : crc[1:0]==0 ? 3'd1
+		     : crc[1:0]==0 ? 3'd2 : 3'd4);
+
+   /*AUTOWIRE*/
+   // Beginning of automatic wires (for undeclared instantiated-module outputs)
+   wire [31:0]		out;			// From test of Test.v
+   // End of automatics
+
+   Test test (/*AUTOINST*/
+	      // Outputs
+	      .out			(out[31:0]),
+	      // Inputs
+	      .clk			(clk),
+	      .in			(in[2:0]));
+
+   // Aggregate outputs into a single result vector
+   wire [63:0] result = {32'h0, out};
+
+   // Test loop
+   always @ (posedge clk) begin
+`ifdef TEST_VERBOSE
+      $write("[%0t] cyc==%0d crc=%x result=%x\n",$time, cyc, crc, result);
+`endif
+      cyc <= cyc + 1;
+      crc <= {crc[62:0], crc[63]^crc[2]^crc[0]};
+      sum <= result ^ {sum[62:0],sum[63]^sum[2]^sum[0]};
+      if (cyc==0) begin
+	 // Setup
+	 crc <= 64'h5aef0c8d_d70a4497;
+	 sum <= 64'h0;
+      end
+      else if (cyc<10) begin
+	 sum <= 64'h0;
+      end
+      else if (cyc<90) begin
+      end
+      else if (cyc==99) begin
+	 $write("[%0t] cyc==%0d crc=%x sum=%x\n",$time, cyc, crc, sum);
+	 if (crc !== 64'hc77bb9b3784ea091) $stop;
+	 // What checksum will we end up with (above print should match)
+`define EXPECTED_SUM 64'h704ca23e2a83e1c5
+	 if (sum !== `EXPECTED_SUM) $stop;
+	 $write("*-* All Finished *-*\n");
+	 $finish;
+      end
+   end
+
+endmodule
+
+module Test (/*AUTOARG*/
+   // Outputs
+   out,
+   // Inputs
+   clk, in
+   );
+
+   // Replace this module with the device under test.
+   //
+   // Change the code in the t module to apply values to the inputs and
+   // merge the output values into the result vector.
+
+   input clk;
+   input [2:0] in;
+   output reg [31:0] out;
+
+   localparam ST_0  = 0;
+   localparam ST_1  = 1;
+   localparam ST_2  = 2;
+
+   always @(posedge clk) begin
+      case (1'b1) // synopsys parallel_case
+	in[ST_0]: out <= 32'h1234;
+	in[ST_1]: out <= 32'h4356;
+	in[ST_2]: out <= 32'h9874;
+	default:  out <= 32'h1;
+      endcase
+   end
+endmodule