// DESCRIPTION: Verilator: Verilog Test module
//
// This file ONLY is placed into the Public Domain, for any use,
// without warranty, 2020 by Yutetsu TAKATSUKASA

`ifdef USE_VLT
`define HIER_BLOCK
`else
`define HIER_BLOCK /*verilator hier_block*/
`endif

interface byte_ifs(input clk);
   logic [7:0] data;
   modport sender(input clk, output data);
   modport receiver(input clk, input data);
endinterface;

`ifdef AS_PROT_LIB
module secret (
   clk
   );
`else
module t (/*AUTOARG*/
   // Inputs
   clk
   );
`endif
   input clk;

`ifdef PROTLIB_TOP
   secret i_secred(.clk(clk));
`else
   wire [7:0] out0;
   wire [7:0] out1;
   wire [7:0] out2;
   /* verilator lint_off UNOPTFLAT */
   wire [7:0] out3;
   wire [7:0] out3_2;
   /* verilator lint_on UNOPTFLAT */
   wire [7:0] out5;
   wire [7:0] out6;
   int count = 0;

   non_hier_sub0 i_sub0(.clk(clk), .in(out3), .out(out0));
   sub1 i_sub1(.clk(clk), .in(out0), .out(out1));
   sub2 i_sub2(.clk(clk), .in(out1), .out(out2));
   sub3 #(.P0(1)) i_sub3(.clk(clk), .in(out2), .out(out3));
   // Must not use the same wrapper
   sub3 #(.STR("abc"), .P0(1)) i_sub3_2(.clk(clk), .in(out2), .out(out3_2));
   delay #(.N(2), 8) i_delay0(clk, out3, out5);
   delay #(.N(3), 8) i_delay1(clk, out5, out6);

   always_ff @(posedge clk) begin
      if (out3 != out3_2) $stop;
      $display("%d out0:%d %d %d %d %d", count, out0, out1, out2, out3, out5, out6);
      if (count == 16) begin
         if (out6 == 19) begin
             $write("*-* All Finished *-*\n");
             $finish;
         end else begin
             $write("Missmatch\n");
             $stop;
         end
      end
      count <= count + 1;
   end

`ifdef CPP_MACRO
   initial begin
      $display("Macro for C++ compiler is defined for Verilator");
      $stop;
   end
`endif

`systemc_implementation
#include <iostream>
#define STRINGIFY_IMPL(str) #str
#define STRINGIFY(str) STRINGIFY_IMPL(str)
namespace {
struct statically_initialized {
   statically_initialized() {
      std::cout << "MACRO:" << STRINGIFY(CPP_MACRO) << " is defined" << std::endl;
   }
} g_statically_initialized;
}
`verilog

`endif  // PROTLIB_TOP

endmodule

module non_hier_sub0(
   input wire clk,
   input wire[7:0] in,
   output wire [7:0] out);

   sub0 i_sub0(.*);

endmodule

module sub0(
   input wire clk,
   input wire [7:0] in,
   output wire [7:0] out); `HIER_BLOCK

   logic [7:0] ff;

   always_ff @(posedge clk) ff <= in;
   assign out = ff;
endmodule

module sub1(
   input wire clk,
   input wire [7:0] in,
   output wire [7:0] out); `HIER_BLOCK

   logic [7:0] ff;

   always_ff @(posedge clk) ff <= in + 1;
   assign out = ff;
endmodule

module sub2(
   input wire clk,
   input wire [7:0] in,
   output wire [7:0] out); `HIER_BLOCK

   logic [7:0] ff;

  // dpi_import_func returns (dpi_eport_func(v) -1)
   import "DPI-C" context function int dpi_import_func(int v);
   export "DPI-C" function dpi_export_func;

   function int dpi_export_func(int v);
       return v + 1;
   endfunction

   always_ff @(posedge clk) ff <= 8'(dpi_import_func({24'b0, in})) + 8'd2;

   byte_ifs in_ifs(.clk(clk));
   byte_ifs out_ifs(.clk(clk));
   assign in_ifs.data = ff;
   assign out = out_ifs.data;
   non_hier_sub3 i_sub3(.in(in_ifs), .out(out_ifs));

   always @(posedge clk)
      // dotted access within a hierarchical block should be OK
      if (i_sub3.in_wire != ff) begin
         $display("Error mismatch in %m");
         $stop;
      end
endmodule

module non_hier_sub3(
   byte_ifs.receiver in,
   byte_ifs.sender out);

   wire [7:0] in_wire, out_1, out_2;
   assign in_wire = in.data;
   localparam string sparam = "single quote escape comma:'\\,";
   // Parameter appears in the different order from module declaration
   sub3 #(.STR(sparam), .UNUSED(-16'sd3), .P0(8'd3)) i_sub3(.clk(in.clk), .in(in.data), .out(out_1));
   // Instantiate again, should use the same wrapper
   sub3 #(.STR(sparam), .UNUSED(-16'sd3), .P0(8'd3)) i_sub3_2(.clk(in.clk), .in(in.data), .out(out_2));
   always @(posedge in.clk)
      if (out_1 != out_2) $stop;

   assign out.data = out_1;
endmodule

module sub3 #(
   parameter logic [7:0] P0 = 2 + 1,
   type TYPE = logic,
   parameter int UNPACKED_ARRAY[2] = '{0, 1},
   parameter logic signed [15:0] UNUSED = -3,
   parameter string STR = "str") (
   input wire clk,
   input wire [7:0] in,
   output wire [7:0] out); `HIER_BLOCK

   initial $display("P0:%d UNUSED:%d %s", P0, UNUSED, STR);

   TYPE [7:0] ff;
   always_ff @(posedge clk) ff <= in + P0;
   always_ff @(posedge clk) if (out4 != out4_2) $stop;

   wire [7:0] out4;
   wire [7:0] out4_2;
   assign out = out4;
   /* verilator lint_off REALCVT */
   sub4 #(.P0(1.6), .P1(3.1), .P3(4.1)) i_sub4_0(.clk(clk), .in(ff), .out(out4));  // incr 2
   sub4 #(.P0(2.4), .P1(3.1), .P3(5)) i_sub4_1(.clk(clk), .in(ff), .out(out4_2));
   /* verilator lint_on REALCVT */
endmodule

module sub4 #(
   parameter int P0 = 1.1,
   parameter P1 = 2,
   parameter real P3 = 3) (
   input wire clk,
   input wire [7:0] in,
   output wire[7:0] out); `HIER_BLOCK

   initial begin
      if (P1 == 2) begin
         $display("P1(%f) is not properly set", P1);
         $stop;
      end
   end

   reg [7:0] ff;
   always_ff @(posedge clk) ff <= in + 8'(P0);
   assign out = ff;
endmodule

module delay #(
   parameter N = 1,
   parameter WIDTH = 8) (
   input wire clk,
   input wire[WIDTH-1:0] in,
   output wire [WIDTH-1:0]out); `HIER_BLOCK

   reg [WIDTH-1:0] tmp;
   always_ff @(posedge clk) tmp <= in;
   if (N > 1) begin
      delay #(.N(N - 1), WIDTH) i_delay(clk, tmp, out);
   end else begin
      assign out = tmp;
   end
endmodule